Saturday, February 17, 2007

Backup (rear view) camera installation


These are three images of the back up camera that we purchased from Costco.



The camera is mounted inside the coach near the top of the rear window using
two pieces of plastic that were bent to the correct angle with a heat gun.





The on/off switch is mounted near an overhead light where a 12 volt line was tapped.
The camera and monitor turn on and off seperately. The monitor has its own on/off
switch mounted on the console.



I used the provided double sided adhesive to mount the camera on the dash once
a satisfactory location was found. I used duct tape to hold it in place first to make sure the location was good. Power for the monitor was tapped off of the supply to the cigarette lighter in the dash. It came with an alternate 12V plug for that recepticle for anyone not wanting to do wiring under the dash.


We leave the camera on all the time while driving. It has a very wide angle lense but still is a great aid. I plan to experiement with the angle of the camera to get optimal range. It's great for backing up and watching tailgaters but the image drops off quickly at extended distances. There is very little interference with the signal.

Michelle 2/17/2007 Felton, Ca.

Add to Cart

If It Will Make You Feel Good

Contributors

My gameknot link

Play online chess